3-in-1 Waterproof Vacuum Penis Pump – 6 Modes, LCD Screen

💪 3-in-1 Waterproof Vacuum Penis Pump With 6 Suction Modes and a 3D Silicone Sleeve

Most penis pumps are a bare cylinder. This one lines the inside with a textured 3D silicone sleeve, which means the same device works as a pressure tool and as a stroker rather than only one or the other. Six suction modes and a 0–55 kPa pressure range give you fine control instead of all-or-nothing vacuum, and the LCD screen shows exactly which setting you are on. It is fully waterproof, so the shower is a genuine option and cleaning is a rinse rather than a careful wipe.

🔄 What the 3-in-1 Penis Pump Actually Does

• 🌀 1. Adjustable suction training — six suction modes across a measured 0–55 kPa range, with three training settings, so pressure sessions are repeatable rather than guesswork.
• 🌹 2. Stroking stimulation — the 3D textured silicone sleeve inside the cylinder gives it masturbator-style sensation, which a plain pressure tube cannot do.
• 💧 3. Shower and bath use — fully waterproof construction means it works wet and rinses clean directly under the tap.

✨ Suction Control, LCD Display and Waterproof Build

• 🌀 6 suction modes — from a gentle warm-up level up to strong suction, so you can build gradually instead of jumping straight to full vacuum.
• 📊 0–55 kPa pressure range with 3 training settings — measured pressure rather than guesswork, which matters when you want to repeat the same session next time.
• 📱 LCD screen — shows the current mode and pressure at a glance, so you are not counting button presses in the dark.
• 🌹 3D silicone inner sleeve — textured inside for stroking sensation, which is what lets this double as a masturbator rather than a plain pressure cylinder.
• 💧 Fully waterproof — safe in the shower or bath and rinsed clean directly under the tap.
• 🛡️ Thickened silicone seal — the reinforced base holds the seal steady and is shaped to avoid accidentally drawing in the testicles.
• 📏 Roomy cylinder — 68.8mm internal diameter and 200mm depth, which accommodates most sizes.

🎯 Who This Vacuum Penis Pump Suits

It fits men who want a firmer, fuller erection before sex and would rather have measured pressure control than a hand bulb they cannot calibrate. The textured sleeve also makes it worth considering if you would otherwise buy a pump and a stroker separately. Anyone new to pumps is well served by the lowest of the six modes and the on-screen pressure reading, since you can see what you are doing rather than judging by feel. If you want thrusting, heating or sound, an automatic masturbator is the right category instead — a pump works through pressure.

💡 How To Use a Vacuum Penis Pump Safely

• Apply water-based lubricant around the silicone seal so it grips the skin and holds a proper vacuum.
• Start on the lowest suction mode and the lowest pressure setting, then build up over several sessions.
• Keep each round short and release the pressure between rounds rather than holding the vacuum for long stretches.
• Stop immediately if you feel pain, numbness, tingling or see any discolouration.
• Rinse the cylinder and sleeve under warm water with a mild toy cleaner, then air dry fully before storing.
• If you take blood thinners, have a bleeding or circulatory condition, or have a penile implant, check with a doctor before using a vacuum pump. A pump is not a treatment for a medical condition.

❓ Penis Pump Questions: Pressure, Waterproofing and Fit

What are the three functions? Adjustable suction training, stroking stimulation from the 3D silicone sleeve, and waterproof use in the shower or bath.

How much pressure does it produce? Up to 55 kPa, adjustable across three training settings and six suction modes, with the current level shown on the LCD.

Can I use it in the shower? Yes, it is fully waterproof and rinses clean under the tap.

Will it fit me? The cylinder is 68.8mm across and 200mm deep, which suits most men.

How do I clean it? Warm water and a mild toy cleaner on the cylinder and sleeve, then air dry completely before storing.

📦 Vacuum Penis Pump Specifications